1. 3M Products

3M™ Accuspray™ Atomizing Head for PPS™ Series 2.0

Products
  • To be used with 3M™ PPS™ Series 2.0 items only
  • Use on any application, such as wet on wet primer, primer surfacer, basecoat, topcoat, lacquer, adhesives and some coatings
  • Apply with any 3M™ Accuspray™ Replaceable Nozzle Series Spray Gun
  • Transparent atomizing head/nozzle allows you to see if it needs cleaning or replacing
 More...
Product Colour
Product_Color
View All Products
 Product Colour
All Models
Close
Product Details

The 3M™ Accuspray™ Atomizing Head for PPS™ Series 2.0 is an approved 3M replacement part to use with any 3M™ Accuspray™ Replaceable Nozzle Series Spray Gun. This product is only to be used with the 3M™ PPS™ Series 2.0 items.

Designed to provide the ideal atomization for a wide range of spray coatings, 3M™ Accuspray™ Atomizing Head for PPS™ Series 2.0 are an integral part of our 3M™ Accuspray™ Spray Gun system. These replaceable, reusable atomizing heads are incrementally sized for ideal atomization, whether you’re applying low viscosity coatings such as waterborne, solvent basecoat paint, or higher viscosity coatings such automotive primers or adhesives. These heads are easily cleaned and reused, or can be quickly removed and replaced for the performance of a new spray gun on demand. Further benefits include optimised primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. Each replaceable atomizing head is molded from clear plastic so technicians can easily see when the head is clean to reduce cleanup times. 3 sizes of colour coded 3M™ Accuspray™ Atomizing Head for 3M™ PPS™ Series 2.0 are available: 1.4 mm atomizing heads deliver fine atomization with minimal overspray, making it ideal for lower viscosity materials such as automotive sealer, paint, topcoats, lacquers and light adhesives. 1.8 mm replaceable atomizing heads are ideal for med viscosity to hi viscosity coatings such as auto primers, lacquers and adhesives. 2.0 mm atomizing heads are typically used with our 3M™ Accuspray™ HGP Spray Gun, built specifically for applying high volume, high viscosity fluids. Use these heads for applying gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings. Further benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. Only compatible with 3M™ PPS™ Series 2.0.

  • To be used with 3M™ PPS™ Series 2.0 items only
  • Use on any application, such as wet on wet primer, primer surfacer, basecoat, topcoat, lacquer, adhesives and some coatings
  • Apply with any 3M™ Accuspray™ Replaceable Nozzle Series Spray Gun
  • Transparent atomizing head/nozzle allows you to see if it needs cleaning or replacing
  • 4 atomizing heads per kit
Specifications
Product Colour
Clear, Orange, Red
Product Type
Head
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English