1. 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315

Products
  • Yellow flexo plate mounting tape provides air release feature
  • 0.38 mm thickness
  • Medium soft
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More...
Overall Length (Imperial)
Overall_Length_Imperial
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
View All Products
 Overall Length (Imperial), Overall Width (Imperial)  Overall Width (Metric)
All Models
Close
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
Yes
Industries
Print
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Soft
Print Quality (Series)
13 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.43 mm
Units per Case
1
Urethane Sleeves
Yes
Warranty Period
2 Years from Date of Manufacture
Details
  • Yellow flexo plate mounting tape provides air release feature
  • 0.38 mm thickness
  • Medium soft
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
  • Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315. Our 0.38 mm yellow, double coated foam tape has the air release feature with easy plate side removal. It is used for high speed printing of combination work when halftone areas exceed solids.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for high speed printing of combination work when halftone areas exceed solids. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

Suggested Applications

  • Use for mounting flexographic print plates to print cylinders
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English