1. 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H

3M ID 7000047426
  • Teal, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.38 mm thickness
  • Apply high performance label materials that are moisture and chemical resistant
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More...
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
Yes
Consumer Label
No
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Medium Firm
Print Quality (Series)
17 Series
Product Colour
Teal
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.43 mm
Units per Case
1
Urethane Sleeves
Yes
Warranty Period
2 Years from Date of Manufacture
Details
  • Teal, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.38 mm thickness
  • Apply high performance label materials that are moisture and chemical resistant
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H. Our 0.38 mm teal, double coated foam tape has the air release feature with high plate side adhesion. It is used when you have slightly more solids in a combination of solid and halftone printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for work where you have slightly more solids in a combination of solid and halftone printing. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

Suggested Applications

  • Use for bonding low surface energy (LSE) plastics, textured and powder coatings, and painted surfaces
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English