1. 3M Products

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1915

Products
  • Pink, flexo plate mounting tape with air release feature adhesive
  • 0.38 mm thickness
  • Light medium
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More...
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
View All Products
 Overall Width (Imperial)  Overall Width (Metric)
All Models
Close
Specifications
Air Release
Yes
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Composite Sleeves
No
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Light Medium
Print Quality (Series)
19 Series
Total Tape Thickness without Liner (metric)
0.43 mm
Urethane Sleeves
Yes
Details
  • Pink, flexo plate mounting tape with air release feature adhesive
  • 0.38 mm thickness
  • Light medium
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
  • Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1915. Our 0.38 mm pink, double coated foam tape has the air release feature with easy plate side removal. It is used for high speed when process and halftone images predominate.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1915 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality with high speed when process and halftone images predominate. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

Suggested Applications

  • Use for mounting flexographic print plates to print cylinders
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English