3M™ Diamond Grade™ Conspicuity Vehicle Marking with ECE 104 Mark 983-72 Red (55 mm x 50 m)

• Help to reduce accidents and save lives
• Improve safety and increase visibility of vehicles
• Enjoy less downtime and decreased repair costs
• Improve corporate image through being more proactive about safety
• Protect your company against potential legal action related to third party safety
• Meet the requirements of UN-ECE 104 Regulation
• Retains reflectivity when totally wet by rain or when viewed at wide entrance angles.
• No dirt and water penetration due to edge sealing
• Pressure sensitive adhesive
• UN-ECE104 Class C approved

Be seen and be safe during the hours of darkness. Make sure your fleet’s vehicles are visible on the road, even in poor visibility conditions, with our retro-reflective 3M™ Diamond Grade™ Vehicle Marking Tape with ECE 104 Mark 983-10 Red for application on rigid vehicles.

Be seen and be safe during the hours of darkness. Make sure your fleet’s vehicles are visible on the road, even in poor visibility conditions, with our retro-reflective 3M™ Diamond Grade™ Vehicle Marking Tape with ECE 104 Mark 983-10 Red for application on rigid vehicles.

Suggested Applications

• Apply to Heavy Goods Vehicles (HGVs) with a mass over 7.5 tonnes and trailers over 3.5 tonnes, available for rigid and curtain sides
• Use red markings on the rear of vehicles, covering at least 80 per cent of its total length and width and as close as practicable to the edges
• Red or yellow markings must be used for the rear of the vehicle, as close as practicable to the edge of the vehicle. Yellow or white markings may be used for the side of vehicles, covering at least 80 per cent of its length.