3M™ Diamond Grade™ Conspicuity Vehicle Marking with ECE 104 Mark 997-10 White (52 mm x 50 m)

• Fewer accidents mean less downtime, less contracts missed and savings on repair costs.
• Improve corporate image through being more proactive about safety.
• Enjoy less downtime and decreased repair costs
• Improve corporate image through being more proactive about safety
• Protect your company against potential legal action related to third party safety
• Meet the requirements of UN-ECE 104 Regulation
• Superior day and nighttime brightness
• No dirt and water penetration due to edge sealing
• Designed for standard and coated canvas application

Be seen and be safe during the hours of darkness. Make sure your fleet’s vehicles are visible on the road, even in poor visibility conditions, with our retro-reflective 3M™ Diamond Grade™ Vehicle Marking Tape with ECE 104 Mark 997-10 White for application on curtain sided vehicles.

Be seen and be safe during the hours of darkness. Make sure your fleet’s vehicles are visible on the road, even in poor visibility conditions, with our retro-reflective 3M™ Diamond Grade™ Vehicle Marking Tape with ECE 104 Mark 997-10 White for application on curtain sided vehicles.

Suggested Applications

• ECE104 is a regulation that establishes guidelines for the use of retro-reflective safety markings on the rear and sides of heavy goods vehicles operating throughout Europe. It requires that homologated retroreflective markings be applied to rigid, curtain and tanker vehicles with a mass over 7.5 tonnes or trailers that have a mass over 3.5 tonnes.
• The reflective material must carry the “E-mark” which means the tape meets the minimum requirements of the regulation. The reflective markings must be 'Class RA2' or 'microprismatic' (e.g. 3M™ Diamond Grade™ DG³ reflective sheeting) in the case of rear markings and 'high visibility fluorescent or non fluorescent yellow reflective' in the case of side markings.
• Red or yellow markings must be used for the rear of the vehicle, as close as practicable to the edge of the vehicle. Yellow or white markings may be used for the side of vehicles, covering at least 80 per cent of its length.