1. 3M Products
  • 3M™ Diamond Microfinishing Film Roll 675L, 203.2 mm x 7.62 m x 76.2 mm, 125 µm
  • 3M™ Diamond Microfinishing Film Roll 675L, 203.2 mm x 7.62 m x 76.2 mm, 125 µm

    3M ID 7100086403
    • Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
    • They enable slow abrasive feed rates, which results in fewer steps and reduced abrasive costs
    • The polyester film backing allows roll to be used dry or wet with surface lubricants
    • Works well for thermal spray finishing of contour and complex shapes
     More...
    Specifications
    Backing Material
    Polyester Film
    Backing Weight
    5MIL
    Brand
    3M™
    Micron Grade
    20 μm
    Mineral Type
    Diamond
    Product Form
    Roll
    Product Details
    • Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
    • They enable slow abrasive feed rates, which results in fewer steps and reduced abrasive costs
    • The polyester film backing allows roll to be used dry or wet with surface lubricants
    • Works well for thermal spray finishing of contour and complex shapes
    • Colour coded to reduce the risk of mixing up abrasive grades

    3M™ Diamond Microfinishing Film Roll 675L is made with a strong polyester film backing and sharp diamond mineral to be run for wet and dry applications. Our film rolls deliver fine finishes on hard metals such as thermal spray coating, ceramics, carbides, chilled iron and granite.

    Remove medium stock and deliver fine finishes on hard metals with 3M™ Diamond Microfinishing Film Roll 675L. Our film rolls come in custom sizes, and are made with a strong polyester film backing and sharp diamond mineral to be run for wet and dry applications with water or oil-based lubricants. The micron-graded diamond mineral delivers close tolerance precision finishes, and the belts can be used for thermal spray finishing of contour and complex shapes. 675L rolls are colour coded to reduce the risk of mixing up abrasive grades and enables slow abrasive feed rates, which results in fewer steps and reduced abrasive costs.

    Suggested Applications

    • Use for thermal spray finishing of contour and complex shapes, and to deliver fine finishes on hard metals
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United Kingdom - English