- 3M™ Dyneon™ Fluoroelastomer FC 2144 is suitable for the manufacture of moulded goods and products which require a good bonding between rubber and metal.
- Temperature resistance -18 to 250°C
- Low permeation
- Excellent release and hot tear properties essential for demolding complex geometric profiles and parts containing severe undercuts
View all details
Product Details
3M™ Dyneon™ Fluoroelastomer FC 2144 is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FC 2144 has an incorporated bisphenol cure system.
Special Features Higher viscosity version of 3M™ Dyneon™ Fluoroelastomer FC 2123, Medium viscosity, Process targets: transfer and compression moulding, bonding and calendering, Proprietary incorporated cure technology, Excellent release and hot tear properties essential for demoulding complex geometric profiles and parts containing severe undercuts.
- 3M™ Dyneon™ Fluoroelastomer FC 2144 is suitable for the manufacture of moulded goods and products which require a good bonding between rubber and metal.
- Temperature resistance -18 to 250°C
- Low permeation
- Excellent release and hot tear properties essential for demolding complex geometric profiles and parts containing severe undercuts
Specifications
|
|
|
|---|---|
|
Capabilities
|
Temperature Resistance
|
|
Composition
|
Dipolymer made from hexafluoropropylene and vinylidene fluoride
|
|
Compression Set
|
17 Percent
|
|
Cure Technology
|
Incorporated Cure
|
|
Fluorine Content
|
65.9 Percent
|
|
Mooney Viscosity
|
41 Mooney Units
|
|
Post Cure
|
24 h @ 260°C
|
|
Press Cure
|
5 min @ 177°C
|
|
Product Form
|
Slab
|
|
Shelf Life
|
3 Year
|
|
Total Recycled Content %
|
C
|
|
Weight (metric)
|
25 kg
|
Documents
3M United Kingdom
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English
United Kingdom - English
© 3M 2020. All Rights Reserved..