1. 3M Products

3M™ Dyneon™ Fluoroelastomer FC 2180

3M Product Number 21803M ID B40070249
    • Broad Chemical Resistance
    • Temperature resistance -18 to 250°C
    • Low permeation
    • Proprietary incorporated cure technology may help save time and increase throughput
     More...
    Product Details

    Cure incorporated 66 percent Flourine, intermediate visocity copolymer

    An Incorporated Cure FKM
    3M™ Dyneon™ Fluoroelastomer FC 2180 exhibits lower shrink profiles compared to our 3M™ Dyneon™ Fluoroelastomer FC 2174, and is used in compression and transfer molding, as well as calendering. Its proprietary incorporated cure technology may help you save time while processing and increase throughput.

    Dyneon fluoroelastomer FC 2180 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2180 should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

    Offering Different Quantities to Meet the Needs of the Job
    Dyneon fluoroelastomer FC 2180 is packaged in slab form and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes.

    Delivering Custom Solutions
    3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

    For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FC 2180 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has decades of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • Compression molding
    • Transfer molding
    • Calendering

    • Broad Chemical Resistance
    • Temperature resistance -18 to 250°C
    • Low permeation
    • Proprietary incorporated cure technology may help save time and increase throughput
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United Kingdom - English