1. 3M Products

3M™ Dyneon™ Fluoroelastomer FC 2261Q

3M Product Number 2261Q3M ID B40070314
    • Broad Chemical Resistance
    • Temperature resistance -18 to 250°C
    • Low permeation
    • Amine or bisphenol curable
     More...
    Product Details

    High viscosity raw gum copolymer used for increasing viscosity and green strength.

    A Raw Gum FKM
    3M™ Dyneon™ Fluoroelastomer FC 2261Q is an intermediate-viscosity raw gum used for increasing viscosity and green strength. This FKM can be used in compression molding, and is amine or bisphenol curable.

    Dyneon fluoroelastomer FC 2261Q can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical FKM formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2261Q should be banded on the mill prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

    Offering Different Quantities to Meet the Needs of the Job
    Dyneon fluoroelastomer FC 2261Q is packaged in slab form and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes.

    Delivering Custom Solutions
    3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

    For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FC 2261Q is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has decades of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • Compression molding
    • Viscosity modification
    • Green strength modification

    • Broad Chemical Resistance
    • Temperature resistance -18 to 250°C
    • Low permeation
    • Amine or bisphenol curable

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United Kingdom - English