1. 3M Products

3M™ Dyneon™ Fluoroplastic Granules PFA 6505TZ

3M Product Number 6505TZ3M ID 97500013707
  • In comparison to the N grades the 3M Dyneon Fluoroplastic PFA T grades are chemically modified to show additional benefits: The 3M Dyneon Fluoroplastic PFA T grades show a high thermal processing stability resulting in a broad processing window. In addition, they are easily released from moulds, show an improved stress crack resistance and a smooth surface.
  • Generally, 3M Dyneon Fluoroplastic PFA T grades are used for corrosion protection in valves, pumps, tanks, tubes and pipes, or heating cables. 3M Dyneon Fluoroplastic PFA 6505TZ, with a Melt-Flow-Index (372 °C/5 kg) of 5 g/10 min, is a material with a high viscosity and is used in low shear processes like thick walled extrusion, linings, transfermoulding moulding or tube extrusion, especially when a broad processing window and an easy release from the mould is required combined with a medium MFI.
  • Improved mould release properties
  • High transparency
 More...
Product Details

3M™ Dyneon™ Fluoroplastic PFA 6505TZ, a fully fluorinated copolymer made from tetrafluoroethylene and perfluorvinylether, is characterized by its excellent temperature resistance, optimal chemical and weathering resistance and very good dielectric capabilities.

Special Features Wide service temperature range, Extremely high weathering resistance and UV-stability, High limiting oxygen index: Does not support combustion, Good non-stick characteristics, Broad processing window.

  • In comparison to the N grades the 3M Dyneon Fluoroplastic PFA T grades are chemically modified to show additional benefits: The 3M Dyneon Fluoroplastic PFA T grades show a high thermal processing stability resulting in a broad processing window. In addition, they are easily released from moulds, show an improved stress crack resistance and a smooth surface.
  • Generally, 3M Dyneon Fluoroplastic PFA T grades are used for corrosion protection in valves, pumps, tanks, tubes and pipes, or heating cables. 3M Dyneon Fluoroplastic PFA 6505TZ, with a Melt-Flow-Index (372 °C/5 kg) of 5 g/10 min, is a material with a high viscosity and is used in low shear processes like thick walled extrusion, linings, transfermoulding moulding or tube extrusion, especially when a broad processing window and an easy release from the mould is required combined with a medium MFI.
  • Improved mould release properties
  • High transparency
  • Excellent almost universal resistance to solvents and chemicals
  • Excellent electrical insulation properties, e.g. dielectric breakdown strength, dielectric constant
  • Smooth surfaces
  • Good low-friction properties
  • Improved stress-crack resistance
Specifications
Capabilities
Chemical Resistance, Temperature Resistance
Container Type
Box Gallon
Flexural Modulus
550 MPa (80,000 psi)
Industries
Electrical, Fuel Cell, Rubber and Plastic
Manufacturing Segment
Powertrain
Melt Flow Index (MFI)
5 g/10 min.
Melting point
310°C (590°F)
Net Weight (Metric)
50 kg
Product Form
Pellet
Product Type
PFA
Specific Gravity
2.15
Sub Industries
Balance of Plant (BOP)
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English