1. 3M Products

3M™ Dyneon™ PTFE Micropowder TF 9201Z

3M Product Number 9201Z
Products
  • Due to its highly specific particle surface, 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be effective as a rheological additive and significantly increases viscosity when added to liquids. This effect is not temperature-dependent. If TF 9201Z is added to solids or coatings, it can lead to a significant reduction in friction resistance and can also have a positive influence on the non-stick effect of the surface.
  • 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be added to oils, fats, polymers, paints, elastomers and coatings. Typical additional quantity can vary between < 1 % and 20 % and depends on the selected matrix and the desired properties. Plastics that can benefit from the properties of TF 9201Z include polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone. Elastomers include fluoroelastomers, neoprenes, nitriles and silicones.
  • Increased degree of abrasion resistance
  • Low molecular PTFE
 More...
Net Weight (Metric)
Net_Weight_Metric
View All Products
 Net Weight (Metric)
All Models
Close
Product Details

3M™ Dyneon™ PTFE Micropowder TF 9201Z is a white, non-free flowing agglomerate of fine, low molecular PTFE micropowder. The agglomerate features a particle size of around 9 μm.

Special Features Agglomerate, Almost universal chemical resistance, Good non-stick properties, Reduced friction resistance, Large operating temperature range.

  • Due to its highly specific particle surface, 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be effective as a rheological additive and significantly increases viscosity when added to liquids. This effect is not temperature-dependent. If TF 9201Z is added to solids or coatings, it can lead to a significant reduction in friction resistance and can also have a positive influence on the non-stick effect of the surface.
  • 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be added to oils, fats, polymers, paints, elastomers and coatings. Typical additional quantity can vary between < 1 % and 20 % and depends on the selected matrix and the desired properties. Plastics that can benefit from the properties of TF 9201Z include polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone. Elastomers include fluoroelastomers, neoprenes, nitriles and silicones.
  • Increased degree of abrasion resistance
  • Low molecular PTFE
  • Easy deagglomeration
  • U.S. Food and Drug Administration (FDA) approved up to 20 % weight in polymer formulations
Specifications
Average Particle Size
9
Bulk Density
350
Capabilities
Increased Production Throughput
Container Type
Box Gallon, Drum Gallon
Industries
Paints and Coatings, Rubber and Plastic
Net Weight (Metric)
25 kg, 300 kg
Product Type
PTFE
Documents
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English