1. 3M Products

3M™ Glass Bubbles HGS8000X

3M Product Number HGS8000X3M ID 7000033815
  • Thermal conductivity reduction
  • Temperature resistance
 More...
Product Details

3M™ Glass Bubbles HGS8000X are hollow glass spheres designed for use in drilling, completion, and workover fluids, as well as cement slurries for the oil and gas industry. With a nominal density of 0.42 g/cm3 and an isostatic crush strength of 8,000 psi / 551 bar, HGS8000X are well-suited for use in moderate to deep wells.

What are 3M™ Glass Bubbles? 3M™ Glass Bubbles HGS Series are engineered hollow glass spheres made from water-resistant and chemically-stable soda-lime-borosilicate glass. The use of 3M glass bubbles HGS series as density reducing agents in well construction applications offer the potential for: Reduced Non Productive Time (NPT) Improved well integrity Increased well productivity When drilling and cementing across highly depleted zones and weaker formations, low density systems are required to prevent or minimize fluid loss/lost circulation, formation damage and other problems associated with excessive overbalance conditions. Our 3M Glass bubbles offer stability by maintaining target pressures with greater reliability throughout the drilling process. Minimizing the differential pressure (bottom hole pressure minus reservoir pressure) is essential for the success of any drilling operation. 3M™ Glass Bubbles HGS8000X in Cementing 3M glass bubbles HGS8000X added to light weight cement slurries help prevent problems associated with excessive overbalance, including reduced top of cement (TOC) and thus the need for remedial squeeze. Additional benefits include the potential for: Reduced wait-on-cement (WOC) Reduced need for multi-staging When compared with other microspheres, cementing with HGS8000X in moderate to deep wells offers: Consistency batch-to-batch and location-to-location Greater density reduction capacity (cement slurry density values below 9.0 lb/gal (1.1 Kg/l) have been achieved) 3M Glass Bubbles HGS8000X in Drilling, Completion and Workover Fluids The use of light weight completion and work-over fluids made with 3M glass bubbles HGS8000X help reduce and control the bottom-hole pressure, offering the potential for reduced fluid loss and lost circulation – as well as preventing or minimizing formation damage. 3M glass bubbles HGS8000X in completion and workover fluids are: More economical and allow for a greater density reduction w

  • Thermal conductivity reduction
  • Temperature resistance
Specifications
Capabilities
Chemical Resistance, Lightweighting, Temperature Resistance
Color (unaided eye)
White, powdery
Composition
Soda-lime-borosilicate glass
Density (g/cc)
0.42
Density Range (g/cm3)
0.40 - 0.49
Industries
Cementing and Drilling Fluids
Particle Size (D50 Micron)
22
Particle Size Range (D50 Micron)
20 - 29, 20 - 29
Strength (MPa)
55.1
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English