1. 3M Products

3M™ Glass Bubbles S60, 60 kg

3M ID 7000079895
  • Lower viscosity, improved flow
  • Increased filler loading, reduced cost
  • VOC reduction
  • Chemical stability and inertness
 More...
Product Details
  • Lower viscosity, improved flow
  • Increased filler loading, reduced cost
  • VOC reduction
  • Chemical stability and inertness
  • Reduced dielectric constant
  • Thermal conductivity reduction
  • Temperature resistance

3M™ Glass Bubbles S60 glass bubbles have a density of 0.6 g/cc and an isostatic crush strength of 10000 psi. The S Series glass bubbles have smaller particle sizes than the K Series.

At 6,000 psi / 414 bar , 3M™ S60 Glass Bubbles have a fractional survival rate of 90% for consistent performance and good survivability. Although 3M glass bubbles S60 is primarily used as an additive in automotive injection molded parts, it has numerous applications in other markets, including – construction, electronics, marine – anywhere a strong additive is needed to reduce part weight without compromising strength. Get the most out of your finished products; use 3M glass bubbles to help reduce weight and thermal expansion.

Specifications
Capabilities
Chemical Resistance, Increased Production Throughput, Lightweighting, Temperature Resistance
Color (unaided eye)
White, powdery
Composition
Soda-lime-borosilicate glass
Density (g/cc)
0.6
Density Range (g/cm3)
0.60 - 0.69
Industries
Construction, Paints and Coatings, Rubber and Plastic, Transportation
Particle Size (D50 Micron)
30
Particle Size Range (D50 Micron)
30 - 39, 30 - 39
Strength (MPa)
41.37
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English