1. 3M Products
  • Scotch-Brite™ EX2 Deburring Wheel X2-WL
  • Scotch-Brite™ EX2 Deburring Wheel X2-WL

    Products
    • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
    • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
    • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
    • Resists smearing for cleaner surfaces and less preparation
     More...
    Overall Width (Metric)
    Overall_Width_Metric
    Overall Diameter (Metric)
    Overall_Diameter_Metric
    View All Products
     Overall Width (Metric)  Overall Diameter (Metric)
    All Models
    Close
    Product Details
    • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
    • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
    • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
    • Resists smearing for cleaner surfaces and less preparation
    • Unique resin system produces less smearing, reducing clean and prep time

    Featuring a high performance combination of mineral and density, Scotch-Brite™ EX2 Deburring Wheel is suited to applications where a moderate degree of conformability, wheel hardness and edge retention are needed. Our deburring wheels have a unique resin system that helps minimise smearing and reduces heat build-up. They run cool and resist loading due to their open-web construction. This reduces the risk of part discolouration and warping, while extending the life of the wheel. They are available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminium oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminium oxide, it produces a finer finish EX2 Deburring Wheels are available in fine and medium grade. Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into a non-woven fibre matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.

    Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. Our deburring wheel performs best when consistently presented with a sharp edge or metal burrs.

    Specifications
    Applications
    Deburring
    Attachment Type
    Center Hole
    Center Hole Diameter (Metric)
    127 mm
    Equipment - Machines
    Manual Backstand
    Form Type
    Convolute/Deburring
    Grade
    Fine, Medium
    Industries
    Metalworking
    Max RPM
    3600
    Mineral Type
    Silicon Carbide
    Overall Diameter (Metric)
    254 mm
    Overall Width (Metric)
    25.4 mm
    Position
    Better
    Product Form
    Wheel
    Product Key
    X2-WL
    Sub Applications
    Blending, Flat Finishing
    Sub Industries
    Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
    Substrates
    Composites, Glass
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United Kingdom - English