1. 3M Products

Scotch-Brite™ EX2 Deburring Wheel X2-WL

Products
  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
  • Resists smearing for cleaner surfaces and less preparation
 More...
Overall Width (Imperial)
Overall_Width_Imperial
Overall Diameter (Imperial)
Overall_Diameter_Imperial
Max RPM
Max_RPM
Equipment - Machines
Equipment_-_Machines
View All Products
 Overall Width (Imperial), Overall Diameter (Imperial), Max RPM  Equipment - Machines
All Models
Close
Specifications
Applications
Deburring
Attachment Type
Center Hole
Brand
Scotch-Brite™
Center Hole Diameter (Metric)
127 mm, 76.2 mm
Equipment - Machines
Manual Backstand
Form Type
Convolute/Deburring
Grade
Fine
Industries
Metalworking
Max RPM
3000, 3600, 4500
Mineral Type
Silicon Carbide
Position
Better
Product Form
Wheel
Sub Industries
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
Substrates
Composites, Glass
Total Recycled Content %
C
Product Details
  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
  • Resists smearing for cleaner surfaces and less preparation
  • Unique resin system produces less smearing, reducing clean and prep time

Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. Our deburring wheel performs best when consistently presented with a sharp edge or metal burrs.

Featuring a high performance combination of mineral and density, Scotch-Brite™ EX2 Deburring Wheel is suited to applications where a moderate degree of conformability, wheel hardness and edge retention are needed. Our deburring wheels have a unique resin system that helps minimise smearing and reduces heat build-up. They run cool and resist loading due to their open-web construction. This reduces the risk of part discolouration and warping, while extending the life of the wheel. They are available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminium oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminium oxide, it produces a finer finish EX2 Deburring Wheels are available in fine and medium grade. Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into a non-woven fibre matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.

Suggested Applications

  • Suited to applications where a moderate degree of conformability, wheel hardness and edge retention are needed
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Kingdom - English