- Overview
- Products
- Advanced Ceramics
- Ceramic Microspheres
- Ceramic Sand Screens
- Fluoropolymers
- Glass Bubbles
- Glass Bubbles for Drilling and Cementing
- Glass Bubbles for Insulation and Buoyancy
- Polymer Processing Additives
- View All Products
- Capabilities
- Applications
- Film And Sheet
- Wire And Cable
- Tube Hose And Pipe
- Metal Coating : 3M Fluoropolymers
- Sealant Applications : 3M Fluoropolymers
- Yarn And Textile
- Polymer Processing : 3M Fluoropolymers
- Moulded Part : 3M Fluoropolymers
- 3D Printing with PTFE
- View All Applications
- Resources
- Support
-
Featured
The Dyneon Product Catalogue, our Featured Products and our New Product Innovations are designed for a variety of industries, including automotive, oil & gas, chemical and petrochemical processing, aerospace, and the electric/electronics industries.
-
July 31, 2015July 31, 2015
3M™ Dyneon™ Fluoropolymer Up-Cycling | Closing the loop
Re-using precious materials without sacrificing the capability characteristics was an illusion... This year, effective Up-Cycling of valuable perfluorinated material has become a reality.
-
September 02, 2013September 02, 2013
Outstanding sealing reliability in the toughest environments
Typically, FFKM materials provide the best possible resistance to very high temperatures and extreme chemical environments, whilst maintaining their elastomeric sealing capabilities and without compromising their key mechanical properties, such as compression set resistance, volume swell resistance and tensile properties.
-
July 31, 2013July 31, 2013
Primer free bonding of FKM and PA 46
The combination of Stanyl® polyamide 46 from DSM and 3M™ Dyneon™ Fluoroelastomers has created a unique composite material to support the rising trend for lightweight automotive construction.
-
October 17, 2017October 17, 2017
3M pioneers 3D printing with PTFE
3M has developed a patent-pending 3D printing technology as an additional and differentiated way of processing fully-fluorinated polymers. This will enable complex structures to be fabricated without the need to use expensive traditional processing techniques.
-
July 31, 2015
3M™ Dyneon™ Fluoropolymer Up-Cycling | Closing the loop
Re-using precious materials without sacrificing the capability characteristics was an illusion... This year, effective Up-Cycling of valuable perfluorinated material has become a reality.
-
September 02, 2013
Outstanding sealing reliability in the toughest environments
Typically, FFKM materials provide the best possible resistance to very high temperatures and extreme chemical environments, whilst maintaining their elastomeric sealing capabilities and without compromising their key mechanical properties, such as compression set resistance, volume swell resistance and tensile properties.
-
-
July 31, 2013
Primer free bonding of FKM and PA 46
The combination of Stanyl® polyamide 46 from DSM and 3M™ Dyneon™ Fluoroelastomers has created a unique composite material to support the rising trend for lightweight automotive construction.
-
October 17, 2017
3M pioneers 3D printing with PTFE
3M has developed a patent-pending 3D printing technology as an additional and differentiated way of processing fully-fluorinated polymers. This will enable complex structures to be fabricated without the need to use expensive traditional processing techniques.
-
-
July 31, 2015
3M™ Dyneon™ Fluoropolymer Up-Cycling | Closing the loop
Re-using precious materials without sacrificing the capability characteristics was an illusion... This year, effective Up-Cycling of valuable perfluorinated material has become a reality.
-
-
September 02, 2013
Outstanding sealing reliability in the toughest environments
Typically, FFKM materials provide the best possible resistance to very high temperatures and extreme chemical environments, whilst maintaining their elastomeric sealing capabilities and without compromising their key mechanical properties, such as compression set resistance, volume swell resistance and tensile properties.
-
-
July 31, 2013
Primer free bonding of FKM and PA 46
The combination of Stanyl® polyamide 46 from DSM and 3M™ Dyneon™ Fluoroelastomers has created a unique composite material to support the rising trend for lightweight automotive construction.
-
-
October 17, 2017
3M pioneers 3D printing with PTFE
3M has developed a patent-pending 3D printing technology as an additional and differentiated way of processing fully-fluorinated polymers. This will enable complex structures to be fabricated without the need to use expensive traditional processing techniques.
-
The Dyneon Product Catalogue, our Featured Products and our New Product Innovations are designed for a variety of industries, including automotive, oil & gas, chemical and petrochemical processing, aerospace, and the electric/electronics industries.
