1. United Kingdom
  2. All 3M Products
  • 3M™ Dyneon™ PTFE Micropowder TF 9201Z
  • 3M™ Dyneon™ PTFE Micropowder TF 9201Z

    3M Product Number 9201Z
    Products
    • Due to its highly specific particle surface, 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be effective as a rheological additive and significantly increases viscosity when added to liquids. This effect is not temperature-dependent. If TF 9201Z is added to solids or coatings, it can lead to a significant reduction in friction resistance and can also have a positive influence on the non-stick effect of the surface.
    • 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be added to oils, fats, polymers, paints, elastomers and coatings. Typical additional quantity can vary between < 1 % and 20 % and depends on the selected matrix and the desired properties. Plastics that can benefit from the properties of TF 9201Z include polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone. Elastomers include fluoroelastomers, neoprenes, nitriles and silicones.
    • Increased degree of abrasion resistance
    • Low molecular PTFE
     More...
    View all details
    Net Weight (Metric)
    Net_Weight_Metric
    View All Products
     Net Weight (Metric)
    All Models
    Close
    Product Details

    3M™ Dyneon™ PTFE Micropowder TF 9201Z is a white, non-free flowing agglomerate of fine, low molecular PTFE micropowder. The agglomerate features a particle size of around 9 μm.

    Special Features Agglomerate, Almost universal chemical resistance, Good non-stick properties, Reduced friction resistance, Large operating temperature range.

    • Due to its highly specific particle surface, 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be effective as a rheological additive and significantly increases viscosity when added to liquids. This effect is not temperature-dependent. If TF 9201Z is added to solids or coatings, it can lead to a significant reduction in friction resistance and can also have a positive influence on the non-stick effect of the surface.
    • 3M™ Dyneon™ PTFE Micropowder TF 9201Z can be added to oils, fats, polymers, paints, elastomers and coatings. Typical additional quantity can vary between < 1 % and 20 % and depends on the selected matrix and the desired properties. Plastics that can benefit from the properties of TF 9201Z include polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone. Elastomers include fluoroelastomers, neoprenes, nitriles and silicones.
    • Increased degree of abrasion resistance
    • Low molecular PTFE
    • Easy deagglomeration
    • U.S. Food and Drug Administration (FDA) approved up to 20 % weight in polymer formulations
    Specifications
    Average Particle Size
    9
    Bulk Density
    350
    Capabilities
    Increased Production Throughput
    Container Type
    Box Gallon, Drum
    Industries
    Paints and Coatings, Rubber and Plastic
    Net Weight (Metric)
    25 kg, 300 kg
    Product Form
    Powder
    Product Type
    PTFE
    Documents