- Bond low surface energy (LSE) plastics, textured and powder coatings, and painted surfaces
- Get the ultimate in label performance with a unique combination of cohesion and adhesion
- Apply high performance label materials that are moisture and chemical resistant
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H. Our 0.38 mm teal, double coated foam tape has the air release feature with high plate side adhesion. It is used when you have slightly more solids in a combination of solid and halftone printing.
Get high quality medium-firm combination print with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1715H. Our teal, double coated, foam mounting tape has an air release feature with high plate side adhesion.
Use the tape for mounting flexographic print plates to cylinders or sleeves. After printing the tape adhesives, remove cleanly from the print plate and print cylinder.
Our tape is suitable for combination of solid and line with tone reproduction and fine reverses printing.
- Use for bonding low surface energy (LSE) plastics, textured and powder coatings, and painted surfaces