1. United Kingdom
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink Medium Voltage splice joint kit QS200 93-AK, 630-1, application up to 24 kV, Pack 1 per case

3M™ Cold Shrink Medium Voltage splice joint kit QS200 93-AK, 630-1, application up to 24 kV, Pack 1 per case

  • Part Number 93-AK 630-1
  • 3M ID 7100066602

The versatile design of the prefabricated one-piece cold shrink splice body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C.

The integrated, semi-conductive electrode forms a faraday cage over the connector and eliminates the use of tapes and void filling.

Solderless earth connection by means of copper screen sleeve and constant force springs.

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 107KB)Safety Data Sheet (PDF, 0B)
Voltage 8.7/15 kV, 12/20 kV, 12.7/22 kV
Shielding Type Wire Shield, Tape Shield, UniShield®, Longitudinally Corrugated (LC)
Splice Type Cold Shrink
Insulation Outer Diameter (metric) 60 mm
Maximum Conductor Size (Imperial) 1300 kcmil
Maximum Conductor Size 630 mm²

Details

Highlights
  • The versatile design of the prefabricated one-piece cold shrink splice body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from - 20°C to + 50°C
  • The integrated, semi-conductive electrode forms a faraday cage over the connector and eliminates the use of tapes and void filling
  • Solderless earth connection by means of copper screen sleeve and constant force springs
  • No heat or flame is needed during splice body installation
  • No special tools required for installation

3M™ Cold Shrink Medium Voltage splice kit series QS200 93-AK xx0-1 are designed for inline splicing up to 24 kV Umax voltage class, to connect single core polymeric power cable systems with copper wire screen according to HD 620 (IEC 60502).

The 93-AK xx0-1 Inline Joint Series includes the Cold Shrink QS200 silicone splice body with integrated electrode, stress control device, silicone elastomer insulation and outer semi-conductive layer, supplied on a pre-stretched removable core for efficiency and ease of installation. Kits are supplied with copper screen sleeve, constant force springs and thick walled EPDM rubber Cold Shrink or Heat shrink outer rejacketing tubes. Kits can also be supplied with mechanical connector.

Typical Properties

Resources