3M™ Diamond Grade™ Conspicuity Vehicle Marking 983 Series

• Fewer accidents mean less downtime, less contracts missed and savings on repair costs
• Improve corporate image through being more proactive about safety
• Protect your company against potential legal action related to third party safety
• PVC free product construction with solvent free adhesive technology
• Bright vivid colours
• Superior day and nighttime brightness
• Retains reflectivity when totally wet by rain or when viewed at wide entrance angles
• No dirt and water penetration due to edge sealing
• Pressure sensitive adhesive
• UN-ECE104 Class C approved
• 3M's DOT tape is certified and guaranteed to meet and exceed NHTSA requirements
• Customer Logo printed on Demand
• Segmented for specific applications ( ex : in curve direction )

3M™ Diamond Grade™ Conspicuity Vehicle Marking Tape Series 983 are designed for application to rigid sided vehicles for increased visibility. Available in yellow, white, red, fluo yellow and fluo yellow green. The 983 continuous tape provides excellent reflectivity and brightness. Guaranteed for ten years. Yellow, white, red and fluo yellow conforms to UNECE 104 requirements.

3M offers a range of homologated retroreflective marking tapes that carry the compulsory "E-mark" and meet all the requirements of regulation ECE104. All of the marking tapes are classified as C-class, meaning they are the brightest markings permitted by the regulations. Moreover, they are easy to apply, resistant to peeling and other damage, and sure to retain their brightness and colour even in the harshest working conditions.

Suggested Applications

• Rear marking plates for large vehicles
• The reflective material must carry the “E-mark” which means the tape meets the minimum requirements of the regulation. The reflective markings must be 'Class RA2' or 'microprismatic' (e.g. 3M™ Diamond Grade™ DG³ reflective sheeting) in the case of rear markings and 'high visibility fluorescent or non fluorescent yellow reflective' in the case of side markings.
• Red or yellow markings must be used for the rear of the vehicle, as close as practicable to the edge of the vehicle. Yellow or white markings may be used for the side of vehicles, covering at least 80 per cent of its length.