3M™ Sprayable Hot Melt Adhesive 6111HT is a high-strength, high-temperature-resistant adhesive used to bond most foams, fabrics, particle board and thin metal. This non-volatile, 100% solids sprayable thermoplastic adhesive requires no drying time with minimal overspray, providing a more sustainable solution for increasing productivity. Available in blue and tan.
3M™ Scotch-Weld™ Hot Melt Adhesive 6111HT is a heat applied, 100% solids, sprayable adhesive for a fast and neat alternative to aerosol, contact and solvent-based adhesives. It bonds to a variety of surfaces including low surface energy (LSE) plastics. Ideal for large surface assembly and does not damage heat sensitive surfaces like polystyrene foam, polyethylene and polypropylene. Recommended Applications Insulation Headliners Case inserts Packaging Seating attachment Furniture and upholstery Large surface lamination Cubicle, office partition Decoratives 3M™ Scotch-Weld™ Hot Melt Adhesive 6111HT is ideal for large surface lamination assemblies, such as laminates to table tops, fabric to foam and veneers to furniture and flooring. By simply adding heat, the user can enjoy a strong adhesive that is easily, quickly and accurately applied to one or two surfaces. As an added bonus, adhesion is virtually immediate, with an open time of up to 8 minutes depending on the substrate. It also features high heat resistance for long-lasting, durable bonds in high temperature environments.