- Enables high performance design; extremely high shear and peel strength
- Helps improve service life and reduce damage; high impact resistance that remains strong over time
- Helps reduces processing time; 20 minute worklife
- Improves efficiency; cartridge packaging options allow for convenient dispensing without hand-mixing or weighing
|
|
|
|---|---|
|
Adhesive Type
|
Epoxy
|
|
Container Size (Metric)
|
0.95 Litre, 50 ml
|
|
Cure Rate
|
24 Hours
|
|
Cure Temperature
|
Room Temperature
|
|
Market Segment
|
Interiors
|
|
Product Colour
|
Grey
|
|
Shelf Life
|
12 Month
|
|
Storage Environment
|
Room Temperature
|
|
Time to Handling Strength
|
2-3 Hours
|
|
Worklife
|
20 grams: 20 minutes @ 73 F (23 C)
|
- Enables high performance design; extremely high shear and peel strength
- Helps improve service life and reduce damage; high impact resistance that remains strong over time
- Helps reduces processing time; 20 minute worklife
- Improves efficiency; cartridge packaging options allow for convenient dispensing without hand-mixing or weighing
- Low viscosity allows for flow and fill of irregular surfaces
- Extremely high peel strength
- High peel and shear strength for strong bonds in critical applications
3M™ Scotch-Weld™Structural Epoxy Adhesive EC-3333 B/A is a two-component epoxy adhesive which cures at room temperature or with heat to form a tough, impact resistant bond. It has an excellent adhesion to many metal and plastic substrates.
You can use this high-performance epoxy adhesive to replace mechanical fasteners, screws, rivets and spot welds. 3M™ Scotch-Weld™ Epoxy Adhesive EC-3333 B/A is excellent for bonding a variety of substrates such a metals and many plastics. It can be dispensed in duo-pak cartridges for use with the 3M™ EPX™ Applicator System for minimal waste and professional results. The mix ratio is 2:1 and the adhesive provides a 20 minute work life to allow time to adjust fit prior to setting. The adhesive is fully cured in 5 days (at 72° F /22° C), but can be accelerated with heat.
