Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H. Our 0.51 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive and higher plate side adhesive is designed for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.