1. United Kingdom
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115

Products
  • Tan, flexo plate mounting tape with air release feature adhesive
  • 0.38 mm thickness
  • Soft/Process
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More...
View all details
Overall Width (Metric)
Overall_Width_Metric
Overall Length (Metric)
Overall_Length_Metric
View All Products
 Overall Width (Metric)  Overall Length (Metric)
All Models
Close

GET IN TOUCH WITH US!

Let's work together! 3M products are constantly evolving to better meet customer needs. If you need help finding the right product for your project or have other questions about 3M solutions: Call Us 0870 608 0050

Details
  • Tan, flexo plate mounting tape with air release feature adhesive
  • 0.38 mm thickness
  • Soft/Process
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
  • Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115. Our 0.38 mm tan, double coated foam tape has the air release feature with easy plate side removal. It is used for high quality process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application while mounting and clean removability when demounting.

Suggested Applications

  • Use for mounting flexographic print plates to print cylinders