3M™ Body Gard Flat Coating
- | Select product options for IDs.
Details
Highlights
- Excellent stone-chip resistance
- Quick drying
- Coating becomes tack free in 10-15 minutes
- Overpaintable after 1-2 hrs drying
3M™ Body Gard Flat Coating is a stone chip coating in an aerosol format with a flat finish.
Protect automotive body panels from stone chips with 3M™ Body Gard Flat Coating. Our stone chip coating dries rapidly to give excellent stone chip resistance. It becomes tack free within 10-15 minutes and can be painted with air drying and low bake paints after two hours drying at normal temperature. To get good adhesion of any water based paints a primer is recommended. If you leave the product overnight before over coating, the coating should be scuffed with 3M™ Scotch-Brite™ Ultrafine Grey.
Typical Properties
Resources
Connect with us. We’re here to help.
Send Us a Message
Thank you for your interest in 3M. In order to help us manage and respond to your query effectively, we politely ask you to provide some key information, including your contact details. The information you provide will be used to respond to your request through email or telephone by a 3M representative or one of our authorised business partners with whom we might share your personal information consistent with the 3M privacy policy
Thank you for your contacting 3M
We have received your message and are now looking into your enquiry
One of our representatives will get in touch with you by phone or email
An error occurred.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
