|
|
---|---|
Applications
|
Deburring
|
Attachment Type
|
Center Hole
|
Brand
|
Scotch-Brite™
|
Center Hole Diameter (Metric)
|
127 mm, 203.2 mm, 25.4 mm, 254 mm, 76.2 mm
|
Equipment - Machines
|
Backstand, Inline Sanders, Manual Backstand
|
Form Type
|
Convolute/Deburring
|
Grade
|
Fine, Medium
|
Industries
|
Marine, Metalworking
|
Max Speed
|
2250 rpm, 3000 rpm, 4500 rpm, 6000 rpm
|
Mineral Type
|
Aluminium Oxide, Silicon Carbide
|
Product Form
|
Wheel
|
Size
|
152.4 mm, 203 mm
|
Sub Industries
|
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
|
Substrates
|
All Metals, Composites, Glass, Hard Composite, Soft Composite
|
Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.
Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Our EXL deburring wheels are conformable, making it ideal for deburring stamped or laser cut parts and for finishing after belt sanding. A unique resin system produces less smearing, reducing clean and prep time. Convolute construction and clean, uniform wear keep these wheels running smoothly and help the operator attain a professional finish while minimising fatigue. Scotch-Brite material runs cool and provides these wheels with uniform wear and keeps fresh abrasives continuously exposed, making them a superior choice on heat sensitive substrates. The toughness of these wheels extend their service life. They are available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint preparation and finishing. Aluminium oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminium oxide, it produces a finer finish Scotch-Brite abrasives are unique surface conditioning products with abrasives incorporated into a non-woven fibre matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.