3M™ OEM Match Epoxy Seam Sealer, Black, 200 ml Cartridge, 08528
- Part Number 08528
- 3M ID 7100319202
- UPC 00068060060204
Details
Highlights
- 3M™ OEM Match Epoxy Seam Sealer is a versatile family of epoxy seam sealers designed for use on bare metal or primed surfaces
- Available in black, beige, white, and grey to match the most common OEM-applied seam sealer colors Compatible with many leading automotive paint systems, they are set and ready to paint after 15 minutes
- These sealants are caulkable, toolable, brushable, and sprayable – meaning they can be used in a variety of applications, including door skins, floor pans, trunk floors, roof seams, and many others
- The medium-bodied formula is non-sagging for clean, efficient tooling in vertical and horizontal seams Specially formulated to not shrink, crack, or outgas
- Adheres to properly prepared bare metal and primed surfaces Always apply as directed in OEM repair procedures, position statements, and bulletins
- Built with three corrosion inhibitors for corrosion resistance
3M™ OEM Match Epoxy Seam Sealers are a tough yet flexible material for sealing seams and joints on properly prepared bare metal, as well as primed or painted substrates. They can be used to replicate a variety of factory seam sealer beads. Available in black, beige, white, and grey.
3M™ OEM Match Epoxy Seam Sealers provide quick cure times and non-sag properties that help during vertical applications. In addition, they allow top coating with paint in as little as 15 minutes. Fast-curing seam sealers reduce the potential for rework and allow greater throughput in the body shop. 3M™ OEM Match Epoxy Seam Sealer contains corrosion inhibitors to protect your repair. These two-part sealants are caulkable, toolable, brushable, and sprayable – to help replicate a variety of OEM seam sealer beads including door skins, floor pans, trunk floors, roof seams, and many others. Use with 3M™ OEM Match Seam Sealer tips to replicate a variety of factory seam sealer beads. 3M™ OEM Match Epoxy Seam Sealers form a durable seal with no shrinkage, cracking, or outgassing. They are formulated specifically to adhere to properly prepared bare metal when bare-metal application is allowed by OEM repair guidance. They’re available in black, beige, white, and grey for a great match to common OEM colors. Their non-flowing, medium-bodied formula allows easy tooling for matching OEM seam sealer appearance. NOTE: 3M recommends that all seam sealers, including direct-to-metal seam sealers, should be applied over a 2K primer. 3M™ OEM Match Epoxy Seam Sealer is designed for application over bare steel; galvanized steel; aluminum; 2K urethane primer; 2K Epoxy primer; or to cleaned and prepped OEM finishes. Acid etch primers should never be in direct contact with seam sealers. 1.Wash the surface with an appropriate VOC-compliant product for the removal of surface contaminants. 2.Bare metal surfaces should be sanded with an appropriate 3M 50 – 180 grit abrasive. Scuff previously painted and primed surfaces with a Scotch-Brite™ General Purpose Hand Pad.
Typical Properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
