20 years since its introduction, 3M's Paint Preparation System, 3M™ PPS™, has been recognised as one of the outstanding new products of its time, offering a variety of new benefits for businesses. 3M developed the idea of a disposable paint mixing system to replace traditional spray gun mixing pots and paper filters.
The evolution of a revolution continues with the introduction of the next generation 3M™ PPS™ Series 2.0 and the 3M™ Performance Spray Gun, which combine to offer increased cycle-time in the booth and reduce non-value add work time!
Experience the joy of cleaner, easier, faster painting with the 3M™ PPS™ Series 2.0 Spray Cup System.
Reinvented from top to bottom, the 3M™ PPS™ Series 2.0 Spray Cup System is designed to help make your painting process cleaner and faster.
If you need help finding the right product for your project or have questions about 3M PPS™ Series 2.0 Spray Cup System, get in touch with a 3M expert.
Every lid comes equipped with a quarter-turn lid locking system ensuring a quick, clean seal with the cup in every application. Full diameter filters improve flow, ensure quality, and reduce spitting.
Hard (outer) cups now with mix ratios printed on the cup allow for all mixing and measuring to take place inside of the cup and liner. A built-in access window allows you to check paint level as well as hold the liner while removing the lid for quick, easy and clean refilling or tinting.
Looking for a linerless gravity fed cup system? Look no further than the PPS™ Type V Vented cup series. Lids are equipped with a QCC direct connect spout, built-in full diameter filters and a snap fit connection to the lid while the cup has a 'twist-to-vent' venting design.
The spray gun that can meet any painting need: primer, sealer, industrial, marine, wood and a variety of other coatings used for collision repair. 3M scientists simplify painting again.
Use the product selector below to help identify the right 3M™ PPS™ Series 2.0 Adapter for your spray gun.
The 3M™ Performance Spray Gun delivers top-of-the-line spray performance with unrivalled productivity. Its revolutionary design provides the finish of a premium HVLP (high volume low pressure) primer gun at a fraction of the cost.
Thanks to the replaceable atomising head, it’s like spraying with a brand new gun every time you use a new disposable head.
The 3M Paint Preparation System significantly increases productivity in the paint spray processes. The closed disposable liner system allows for direct mixing and storing of unused paint if needed.
Cleaning time and solvent use is reduced to a minimum, particularly if used with the 3M™ Performance Spray Gun
3M revolutionised the concept of surface protection to enhance your maintenance process.
The 3M™ Dirt Trap Protection System is great for surface protection, but a closer look reveals a breakthrough innovation that actually traps dust, dirt and overspray in a unique non-woven construction.
Clean your booth regularly when it´s necessary!
Metamerism refers to the value of the colour difference between two samples under two different light sources and can make colour matching a difficult and frustrating task.
The 3M PPS™ Colour Check Light II is designed to provide near daylight conditions for more accurate colour matching during paint work.
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...