How to keep your paint booth sparkling clean

How to keep your paint booth sparkling clean

 


  • 3M™ Booth Coating in action

    How to keep your paint studio sparkling clean

    Protect your paint booth walls and lights from paint and primer overspray with 3M’s Booth Coating. The water-based liquid can be easily applied with a spray gun and removed with water when you’ve finished painting. See our step-by-step demonstration below for expert advice on how to keep your paint booth sparkling clean:
     

    1. The best way to apply the booth coating is to use a gravity feed spray gun in combination with a large PPS Lid and liner.
    2. Ensure the first coat of booth coating is completely dry before applying the second coat.
    3. Because the booth coating dries clear, it can be sprayed over glass and light fittings without affecting the brightness or colour temperature of your spray booth.
    4. It can also be applied directly to air regulators and door handles – as it’s non-sticky, it won’t transfer to hands.
    5. When you’re ready to remove the old coating and recoat your booth, soften the used booth coating by spraying it with cold water.
    6. After a few minutes, the sealer can be easily washed off using common detergents.
    7. Leave the walls to dry off before re-coating with sealer.

     

    To learn more about 3M and for more helpful videos, visit our how to section.


Want to find out more?

If you'd like to discuss this further then we'd love to help. Simply choose one of the options opposite. If you're not quite ready then check out the related articles below.

 


Getting in touch

Email Us
Want to speak to someone in our team? Get in touch with us via email today.
Phone Us

0870 240 4203

0870 240 4203


9am - 5pm, Mon - Fri
Where To Buy
Looking to purchase a 3M Bodyshop product?
Find a distributor online or near you.

Follow Us
Change Location
United Kingdom - English